On the fine structure of medium energy electron fluxes in the auroral zone and related effects in the ionospheric D-region

This study is based on measurements of trapped and precipitated electrons of energy &gt;30 keV and &gt;100 keV observed by polar orbiting environmental satellites during overpasses of the imaging riometer at Kilpisjärvi, Finland. The satellites are in sun-synchronous orbits of about 850 km altitude, recording the electron fluxes at 2-s time resolution. The riometer measures the radiowave absorption at 38.2 MHz, showing the spatial pattern within a 240 km field of view. <br><br> The analysis has focussed on two areas. Having found a close correlation between the radiowave absorption and the medium-energy electron fluxes during satellite overpasses, empirical relationships are derived, enabling one quantity to be predicted from the other for three sectors of local time. It is shown that small-scale variations observed during a pass are essentially spatial rather than temporal. <br><br> Other properties, such as the spectra and the relation between precipitated and trapped components, are also considered in the light of the theory of pitch angle scattering by VLF waves. It is found that the properties and behaviour depend strongly on the time of day. In the noon sector, the precipitated and trapped fluxes are highly correlated through a square law relationship

A critical review of the experimental data for developed free turbulent shear layers

Experimental shear layer data are reviewed and the results are compared to numerical predictions for three test cases. It was concluded from the study that many, if not most, of the apparent inconsistencies which exist in the interpretation of the experimental data for free shear layers result from confusing data taken in developed turbulent flows with those taken in transitional or developing flows. Other conclusions drawn from the study include the following: (1) The effects of Mach number are more uncertain primarily because of limited data and the absence of any turbulence measurements for supersonic shear layers. (2) The data available for heterogeneous shear layers are not sufficient to clearly establish the effect of density ratio on mixing rate

The local roots of the participation gap: Inequality and voter turnout

It is generally accepted that the rich are more likely to participate in politics than the poor. It is also generally accepted that the probability than an individual will participate in elections is influenced by the gap between the rich and the poor. There is little agreement, however, about whether inequality across time and space increases or decreases participation. In this paper we examine the impact of inequality across space. We suggest that the impact of inequality depends crucially on whether it is defined in terms of variations between geographical units (‘segregation’) or within geographical units (‘heterogeneity’). Evidence to support this argument is drawn from multi-level British data. Heterogeneity has a mildly positive effect on participation but this effect seems to be outweighed by the negative impact of segregation. The effect of segregation, moreover, is most pronounced among the poorer sections of the population, indicating that geographical isolation among the poor ('ghettoization') leads to lower turnout among these groups

Computational Fluid Dynamic Studies of Vortex Amplifier Design for the Nuclear Industry—I. Steady-State Conditions

In this study the effects of changes to the geometry of a vortex amplifier are investigated using computational fluid dynamics (CFD) techniques, in the context of glovebox operations for the nuclear industry. These investigations were required because of anomalous behavior identified when, for operational reasons, a long-established vortex amplifier design was reduced in scale. The aims were (i) to simulate both the anomalous back-flow into the glovebox through the vortex amplifier supply ports, and the precessing vortex core in the amplifier outlet, then (ii) to determine which of the various simulated geometries would best alleviate the supply port back-flow anomaly. Various changes to the geometry of the vortex amplifier were proposed; smoke and air tests were then used to identify a subset of these geometries for subsequent simulation using CFD techniques. Having verified the mesh resolution was sufficient to reproduce the required effects, the code was then validated by comparing the results of the steady-state simulations with the experimental data. The problem is challenging in terms of the range of geometrical and dynamic scales encountered, with consequent impact on mesh quality and turbulence modeling. The anomalous nonaxisymmetric reverse flow in the supply ports of the vortex amplifier has been captured and the mixing in both the chamber and the precessing vortex core has also been successfully reproduced. Finally, by simulating changes to the supply ports that could not be reproduced experimentally at an equivalent cost, the geometry most likely to alleviate the back-flow anomaly has been identified

Managing sustainability in the seafood supply chain: The confused or ambivalent consumer

The economic, social and environmental benefits of doing business sustainably are now well established, with many industries fully embracing and integrating sustainable practices. However, some industries are facing greater challenges and struggling to embrace sustainable practices. For example, the issue of sustainability within the seafood industry is highly topical, with a 2014 Google search on the term “sustainable fish” scoring over 37.4 million hits. Despite a groundswell of discussion and action within the seafood industry, the current literature on seafood sustainability remains emergent. While consumers are the stakeholder group that arguably has the most potential interest, the actions of all other stakeholders within the industry affect choices available to them. Accordingly, this paper reviews the current literature and seeks to identify how each stakeholder defines and seeks to manage the issue of seafood sustainability. Several sources of confusion, ambiguity and conflict in the field (including gaps in current research) are evident. Consumers are either confused or ambivalent about sustainability with respect to seafood and there is a lack of consensus on what sustainability means across the seafood supply chain, with differing perspectives across the various stakeholders involved with the industry including governments, NGOs, the seafood industry itself (producers, processors, and distributors), and consumers. The review provides an understanding of consumers and other stakeholder perspectives with respect to the sustainability of seafood and provides a basis for developing strategies to reduce ambiguity, promote clarity and shared understandings regarding sustainable seafood, and also opportunities to increase knowledge, potentially leading to more sustainably managed seafood supply chains

A 10B-based neutron detector with stacked Multiwire Proportional Counters and macrostructured cathodes

We present the results of the measurements of the detection efficiency for a 4.7 \r{A} neutron beam incident upon a detector incorporating a stack of up to five MultiWire Proportional Counters (MWPC) with Boron-coated cathodes. The cathodes were made of Aluminum and had a surface exhibiting millimeter-deep V-shaped grooves of 45{\deg}, upon which the thin Boron film was deposited by DC magnetron sputtering. The incident neutrons interacting with the converter layer deposited on the sidewalls of the grooves have a higher capture probability, owing to the larger effective absorption film thickness. This leads to a higher overall detection efficiency for the grooved cathode when compared to a cathode with a flat surface. Both the experimental results and the predictions of the GEANT4 model suggests that a 5-counter detector stack with coated grooved cathodes has the same efficiency as a 7-counter stack with flat cathodes. The reduction in the number of counters in the stack without altering the detection efficiency will prove highly beneficial for large-area position-sensitive detectors for neutron scattering applications, for which the cost-effective manufacturing of the detector and associated readout electronics is an important objective. The proposed detector concept could be a technological option for one of the new chopper spectrometers and other instruments planned to be built at the future European Spallation Source in Sweden. These results with macrostructured cathodes generally apply not just to MWPCs but to other gaseous detectors as well.Comment: 14 pages, 9 figure

15 years of comet photometry: A comparative analysis of 80 comets

In 1976 we began a program of narrowband photometry of comets that has encompassed well over 400 nights of observations. To date, the program has provided detailed information on 80 comets, 11 of which have been observed on multiple apparitions. In this paper we present the observed range of compositions (molecular production rate ratios) and dustiness (gas production compared with AF-rho) for a well sampled group of comets. Based on these results we present preliminary analysis of taxonomic groupings as well as the abundance ratios we associate with a 'typical' comet